Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 223)

Brocade Network Advisor SAN User Manual 171
53-1003154-01
Dashboard customization
6
Setting the time interval
Setting the global time interval in the dashboard toolbar configures the data display time range for
all the applicable widgets. Time interval in the Scope list allows you to select a specific time range
for which you want to display data in the dashboard.
NOTE
Time Interval does not affect the Status and Inventory widgets.
1. Click the Scope arrow.
2. Select a duration from the Time Scope list.
The default time scope is 30 minutes. The available time scopes include the following options:
• 30 Minutes — Displays data for 30 minutes.
• 1 Hour — Displays data for 1 hour.
• 6 Hours — Displays data for 6 hours.
• 12 Hours — Displays data for 12 hours.
• 1 Day — Displays data for 24 hours.
• 3 Days — Displays data for 3 days.
• 1 Week — Displays data for 1 week.
• 1 Month — Displays data for 30 days.
The displayed data changes to the new time range for all the applicable widgets.
3. Click Apply.
Configuring the dashboard display
You can set the dashboard to minimize or expand all status widgets and performance monitors as
well as return to the default settings.
1. Click the Layout Options button.
2. Configure how the widgets display by selecting one of the following options:
• Collapse - Expand All — Select to minimize or expand all widgets and monitors on the
dashboard.
• Reset — Select to reset the dashboard to the default display settings.