Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1165)

Brocade Network Advisor SAN User Manual 1113
53-1003154-01
SAN connection utilization
28
FIGURE 489 Utilization Legend
The colors and their meanings are outlined in Table 86 on page 1113.
TABLE 86 Utilization Legend
Enabling connection utilization
To display the connection utilization, complete the following steps.
1. Choose from one of the following options:
• Select Monitor > Performance > View Utilization.
• Press CTRL + U.
• Click the Utilization icon ( ).
If you have already enabled historical data collection, the Utilization Legend displays in the
main interface window.
If you have not already enabled historical data collection, a message appears informing you
that you must enable historical data collection before you can view utilization, as shown in
Figure 681 on page 1730.
2. Choose one of the following options:
• Select Enable SAN Wide to enable data collection for the entire SAN.
• Select Enable Selected Fabrics to enable data collection for specific fabrics.
Line color Utilization defaults
Red line 80% to 100% utilization
Yellow line 40% to 80% utilization
Blue line 1% to 40% utilization
Gray line 0% to 1% utilization
Black line Utilization disabled