Fabric summary report – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 301
Brocade Network Advisor SAN User Manual
249
53-1003154-01
Reports
6
Fabric Summary report
The Fabric Summary report provides a summary of the discovered fabrics, switches and Access
Gateway (AG) devices associated with the fabric as well as ISL and trunk details.
describes the fields and components of the Fabric Summary Report. For general report
content and table functions, refer to
“Report content and functions”
TABLE 20
Fabric Summary report fields and components
Field/Component
Description
Fabric Details table
Fabric Name
The name of the fabric.
Switch Assigned Fabric Name
The switch assigned fabric name.
Seed Switch WWN
The world wide name of the seed switch.
Seed Switch IP Address
The IP address of the seed switch.
Switch Count
The number of switches in the fabric.
Fabric Port Count
The number of physical ports in the fabric.
Unlicensed Fabric Port Count
The number of unlicensed ports in the fabric.
AG Count
The number of AG devices in the fabric.
AG Port Count
The number of ports on AG devices in the fabric.
Location
The location of the fabric.
Description
The description of the fabric.
Contact
The name of the person or group you should contact about the fabric.
Discovered Time
The date and time the fabric was discovered.
Last Changed Time
The date and time when there was a change in the fabric.
Active Zoneset
The name of the zone configuration which is currently active in the fabric.
Total number of Initiator Devices
The number of initiator devices in the fabric.
Total number of Target Devices
The number of target devices in the fabric.
Total number of Initiator-Target Devices
The number of initiator and target devices in the fabric.
Total number of Unknown Devices
The number of unknown devices in the fabric.
Grand total number of Devices
The number of devices in the fabric.
Switch /AG Details table
Switch Name
The name of the switch. Click to launch the Switch report.
AG Mode
Whether or not the switch is running in AG mode.
Domain ID
The Domain ID for the switch in the format xx(yy), where xx is the normalized value and yy is the
actual value on the wire.
IP Address
The IP address (IPv4 or IPv6 format) of the physical switch. Click to launch the Switch report.
Switch WWN
The world wide name of the virtual switch.
Firmware Version
The firmware version of the switch.
Switch Model
The model of the switch.
Port Count
The number of ports on the switch.