Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 388)

336 Brocade Network Advisor SAN User Manual
53-1003154-01
User-defined performance monitors
7
15. Click OK on the Customize Dashboard dialog box.
The performance monitors display at the bottom of the dashboard.
Configuring a user-defined port performance monitor
For creating a user-defined dashboard, refer to “Creating a user-defined dashboard” on page 269
and perform the following steps to configure a user-defined port performance monitor.
1. Click the Customize Dashboard icon.
The Customize Dashboard dialog box displays.
2. Click the Performance tab.
3. Click Add.
The Add Performance Dashboard Monitor dialog box displays.
4. Select the type of monitor you are creating from the Monitor Type - Port area:
• Top N — Select to monitor the top N (number) ports affected by the selected measure.
• Bottom N — Select to monitor the bottom N (number) ports affected by the selected
measure.
• Distribution — Select to monitor the selected measure for five defined distribution
percentages.
• Time Series — Select to monitor a selected measure for a range of time and specified
targets.
5. Select the port measure for the monitor in the Measure area: