Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 280)

228 Brocade Network Advisor SAN User Manual
53-1003154-01
Inventory
6
FIGURE 95 Violations table
The Violations table displays the Monitoring and Alerting Suite (MAPS) violations for the
product over the selected time duration.
• show arrow — Click to display the following additional detail for the associated violation:
- Time — Displays the time on the server when the violation was reported.
- Product — Displays the name of the product.
- Object Name
- Rule Condition — Displays the conditions defined in the MAPS policy that was
triggered.
- Measure Value — Value of the measure when the violation occurred.
- Unit — The units description of the measure value.
- Marginal — Displays a check mark if this action (event notification) is configured and
enabled on the device.
- Critical — Displays a check mark if this action is configured and enabled on the device.
- Raslog — Displays a check mark if this action is configured and enabled on the device.
- SNMP — Displays a check mark if this action is configured and enabled on the device.
- Fence — Displays a check mark if this action is configured and enabled on the device.
- Email — Displays a check mark if this action is configured and enabled on the device.
- SFP Marginal — Displays a check mark if this action is configured and enabled on the
device.
- Recommended Action — Displays the Fabric OS recommended action for the violation.