Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 891
Brocade Network Advisor SAN User Manual
839
53-1003154-01
Tape LUN statistics
20
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays. (Refer to
.) A list of configured
CryptoTarget containers is displayed.
FIGURE 393
Encryption Targets dialog box
3. Select Tape as the container of type for which to display or clear statistics, then click Statistics.
The Tape LUN Statistics dialog box displays. (Refer to
.) The statistics for all LUNs
that are members of the selected tape container are displayed.
FIGURE 394
Tape LUN Statistics dialog box
The dialog box contains the following information:
•
LUN #: The number of the logical unit for which statics are displayed.
•
Tape Volume/Pool: The tape volume label of the currently-mounted tape, if a tape session
is currently in progress.
•
Tape Session #: The number of the ongoing tape session.
•
Uncompressed blocks: The number of uncompressed blocks written to tape.
•
Compressed blocks: The number of compressed blocks written to tape.