Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 907)

Brocade Network Advisor SAN User Manual 855
53-1003154-01
Disk device decommissioning
20
In order to delete keys from the key vault, you need to know the Universal ID (UUID). To display
vendor-specific UUIDs of decommissioned key IDs, complete the following procedure:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to Figure 266 on page 694.)
2. Select a switch from the Encryption Center Devices table, then select Switch >
Decommissioned key IDs from the menu task bar.
The Decommissioned Key IDs dialog box displays. (Refer to Figure 402 .)
FIGURE 402 Decommissioned Key IDs dialog box
The dialog box contains the following information:
• Decommissioned key IDs that have been decommissioned at the key vault are listed in a
table.
• Universal ID button: Launches the Universal ID dialog box to display the universal ID for
each selected decommissioned key.
You need to know the Universal ID (UUID) associated with the decommissioned disk LUN
key IDs in order to delete keys from the key vault. You can display vendor-specific UUIDs of
decommissioned key IDs. For more information, refer to
“Displaying Universal IDs” on
page 856.
• Delete All button: Deletes all of the listed decommissioned key IDs.
3. Click Delete All to delete the decommissioned keys from the switch. As a precaution, copy the
keys to a secure location before deleting them from the switch. Right-click on an entry in the
table to individually select a key ID. You may also copy or export a single row within the table or
the entire table. To export the keys, right-click and select Export, which will export the key IDs.