Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 551)

Brocade Network Advisor SAN User Manual 499
53-1003154-01
Firmware management
12
Firmware management
A firmware file repository (Windows systems only) is maintained on the server in the following
location: C:\Program Files\Install_Directory\data\ftproot\Firmware\Switches\7.0\n.n.n\n.n.n
The firmware repository is used by the internal FTP, SCP, or SFTP server that is delivered with the
Management application software, and may be used by an external FTP server if it is installed on
the same platform as the Management application software. The repository is not available to FTP
servers on external platforms.
NOTE
The repository is not available on external SCP or SFTP servers installed on the same platform as
the Management application software.
NOTE
Non-disruptive firmware download (HCL) is not supported when downgrading from Fabric OS
version 7.0 to 6.4. You must remove all non-default logical switches and disable Virtual Fabrics
before downgrading.
NOTE
Firmware download is not supported in pure IPv6 mode.
NOTE
You cannot use Fabric OS firmware download with command line options in the Management
application.
NOTE
You cannot configure firmware management through the Management application for Emulex
adapters.
Downloading firmware
NOTE
Non-disruptive firmware download (HCL) is not supported when downgrading from Fabric OS
version 6.2 to 6.1. You must remove all non-default logical switches and disable Virtual Fabrics
before downgrading.
NOTE
You cannot use Fabric OS firmware download with command line options in the Management
application.
You can download firmware using the Firmware Management dialog box.
1. Select Configure > Firmware Management.
The Firmware Management dialog box displays.
2. Select the Download tab ( Figure 227 ).