Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 115)

Brocade Network Advisor SAN User Manual 63
53-1003154-01
Host discovery
3
FIGURE 18 Edit Host Adapters dialog box
3. Configure Host credentials by choosing one of the following options:
• To configure HCM agent credentials, select the HCM agent option. Go to step 5 .
• To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
step 4 .
• To configure WMI server credentials, select the Windows Management Instrumentation
(WMI) option. Continue with
step 4 .
If you do not need to configure Host credentials, skip to step 8 .
4. Configure discovery authentication by choosing one of the following options:
• To configure discovery with authentication, select the HTTPS option in Protocol.
• To configure discovery without authentication, select the HTTP option in Protocol.
5. Enter the port number in the Port field.
The HCM agent default is 34568. The CIM server HTTPS default is 5989. The CIM server HTTP
default is 5988. The WMI HTTPS default is 5986. The WMI HTTP default is 5985.
6. Enter your user name in the User ID field.
The HCM agent default is admin. Leave this field blank for the CIM server.
7. Enter your password in the Password field.
The HCM agent default is password. Leave this field blank for the CIM server.
8. Click OK on the Edit Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
9. Click Close on the Discover Host Adapters dialog box.