Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1640)

1588 Brocade Network Advisor SAN User Manual
53-1003154-01
Database tables and fields
H
MISMATCHED_CONFIGURATIONS If a tunnel is down due to
mismatched configurations
on local and remote end, this
property specifies the list of
such mismatched
configurations. varchar 1024
CIRCUIT_STATUS_STRING Circuit Status string value
from switch for the tunnel varchar 256
L2COS_F_CLASS The default value is 0. smallint
L2_COS_HIGH The default value is 0. smallint
L2_COS_MEDIUM The default value is 0. smallint
L2_COS_LOW The default value is 0. smallint
DSCP_F_CLASS The default value is 0. smallint
DSCP_HIGH The default value is 0. smallint
DSCP_MEDIUM The default value is 0. smallint
DSCP_LOW The default value is 0. smallint
FAILOVER_CIRCUIT Whether the circuit is
configured as failover or not. smallint
FAILOVER_GROUP_ID Represents the failover group
id for the circuit
0 - Default Failover Group.
1 - 9 Failover Group numbers
for the circuits.
-1 - Not supported. For the
switches running less than
FOS 7.2. int
DP1_SOURCE_IP DP1 source IP address of the
circuit. This field will be
empty if the circuit belongs to
a non Skybolt switch or the
DP1 source IP address is not
configure in Skybolt. varchar 64
DP1_DEST_IP DP1 destination IP address
of the circuit. This field will be
empty if the circuit belongs to
a non Skybolt switch or the
DP1 destination IP address is
not configure in Skybolt. varchar 64
DP1_VLAN_TAG Vlan tag of the DP 1 ip
address. This will be -1 for
the non Skybolt switches. int
TABLE 143 FCIP_TUNNEL_CIRCUIT (Continued)
Field Definition Format Size