Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 882)

830 Brocade Network Advisor SAN User Manual
53-1003154-01
Adding target tape LUNs for encryption
20
FIGURE 384 Encryption Targets dialog box
3. Select a target tape storage device from the Encryption Targets table, then click LUNs.
The Encryption Target Tape LUNs dialog box displays. (Refer to Figure 385 .)
FIGURE 385 Encryption Target Tape LUNs dialog box
4. Click Add.
The Add Encryption Target Tape LUNs dialog box displays. (Refer to Figure 386 .) A table of all
LUNs in the storage device that are visible to hosts is displayed. LUNs are identified by the Host
world wide name, LUN number, Volume Label Prefix number, and Enable Write Early ACK and
Enable Read Ahead status. The LUN numbers may be different for different hosts.