Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 645)

Brocade Network Advisor SAN User Manual 593
53-1003154-01
Role-based access control
15
Role-based access control
The Management application enables you to create resource groups and assign users to the
selected role within that group. This enables you to assign users to a role within the resource group.
The Management application provides one preconfigured resource group (All Fabrics). When you
create a resource group, all available roles are automatically assigned to the resource group. Once
the resource group is available, you can assign a user to a role within the resource group.
Host adapter management privileges
You can launch the Host Connectivity Manager (HCM) if you have read and write permissions to the
Host Adapter Management privilege. Other HBA-related operations are controlled by the following
privileges:
• The HBA technical support launch point is controlled by the Technical Support Data Collection
privilege.
• The Fibre Channel Security Protocol (FC-SP) launch point is controlled by the Security privilege.
Read-write (RW) and read-only (RO) permissions are required.
• The HBA performance monitoring launch point is controlled by the Performance privilege.
Host adapter administrator privileges
The Host Adapter Administrator role has the following privileges:
• Add and delete properties
• Discovery setup
• Host management
• Performance
• Properties edit
• Security
• Servers
• View management
• Port Mapping
• Virtual Network Management
Instructions for managing resource groups and users using roles and privileges are detailed in
“User accounts,”“Roles,” and “Areas of responsibility,” in Chapter 5, “User Account Management” .