Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 967)

Brocade Network Advisor SAN User Manual 915
53-1003154-01
LSAN tagging
21
10. Click OK to continue.
All LSAN zones are activated on the selected fabrics and saved to their respective zone
databases.
11. Click OK to close the Zoning dialog box.
Activating LSAN zones
1. Select a backbone fabric from the Connectivity Map or Product List.
2. Select Configure > Zoning > LSAN Zoning (Device Sharing).
The Zoning dialog box displays, with the LSAN scope.
3. Click Activate.
4. Review the information in the Activate LSAN Zones dialog box.
LSAN zones that contain online members are automatically included in the Destination Fabrics
list. For LSAN zones that contain offline members, you can click the right arrow button to
assign these zones to fabrics in the Destination Fabrics list.
5. Click OK to commit the LSAN zones and activate them in the selected fabrics.
A message displays informing you about the effects of LSAN zone activation and asking
whether you want to proceed. Click Yes to confirm the activation, or click No to cancel the
activation.
6. Click OK to close the Zoning dialog box.
LSAN tagging
You can configure two types of tags on an FC router:
• Enforce tag – Specifies which LSANs are to be enforced in an FC router.
• Speed tag – Specifies which LSANs are to be imported or exported faster than other LSANs.
You configure the tags using the command line interface. The Management application displays
the tags.
If tags are configured, they are displayed in the LSAN Zoning dialog box. Note that although you can
configure tags on FC routers running Fabric OS versions earlier than 7.2.0, the tags are displayed in
the Management application only if the FC router is running Fabric OS 7.2.0 or later.
When these tags are configured, only LSAN zones that match the configured tags are retrieved
from the edge fabrics and displayed in the LSAN Zoning dialog box.
Refer to the Fabric OS Administrator’s Guide for information about configuring these tags.