Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 573)

Brocade Network Advisor SAN User Manual 521
53-1003154-01
Ports
12
3. Click Close to close the dialog box.
Manufacturer Plant The name of the manufacturing plant.
Name The name of the switch.
NPIV Enabled Whether the NPIV port is enabled.
Parameter The parameter of the switch.
Physical/Logical Whether the port is a physical port or a logical port.
PID Format The port ID format of the switch.
Port # The port number.
Port Address The address of the port.
Port Module The port’s module.
Port NPIV The number of NPIV ports.
Port Type The type of port.
Port State Whether the port is online or offline.
Port Status Whether the port is enabled or disabled.
Prohibited Whether the port is prohibited.
Protocol The network protocol, for example, Fibre Channel.
RA TOV The resource allocation time out value, in milliseconds, of the
connected switch. This variable works with the E D TOV variable to
determine switch actions when presented with an error condition.
Sequence # The sequence number of the switch.
Serial # The serial number of the switch.
Slot # The slot number of the switch.
Speed (Gb/s) The speed in gigabytes per second.
State The operational status of the port.
Status The operational status of the switch
Switch The switch name.
Tag The tag number of the switch.
Trunking Enabled Whether trunking is enabled on the switch.
Tunnel Count The number of tunnels on the switch.
Tunnel ID The tunnel ID number of the switch.
User Port # The user port number of the switch.
VLAN ID The VLAN identifier.
VPWWN State Whether the VPWWN state is enabled or disabled.
VPWWN Type The VPWWN type: Auto or User.
Auto VPWWN The automatically generated VPWWN.
User VPWWN The user-defined VPWWN.
TABLE 52 Port connection properties (Continued)
Field Description