Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 90
38
Brocade Network Advisor SAN User Manual
53-1003154-01
SAN discovery overview
3
FIGURE 8
Discover Fabrics dialog box
2. Click Add to specify the IP addresses of the devices you want to discover.
The Add Fabric Discovery dialog box displays.
FIGURE 9
Add Fabric Discovery dialog box (IP Address tab)
3. Enter a name for the fabric in the Fabric Name field.
4. Enter an IP address (IPv4 or IPv6) for a device in the IP Address field.
To configure the preferred IP format for the Management application server to connect with
Fabric OS devices, refer to
“Configuring the preferred IP format”
on page 125. If the product
has both an IPv4 and IPv6 address, the Management server uses the preferred address. If a
product does not have the preferred address type, the Management server uses the other IP
type.
For seed switch requirements, refer to