Filtering a report definition – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1361
Brocade Network Advisor SAN User Manual
1309
53-1003154-01
Event custom reports
32
5. In the Name field, enter a name for the definition.
This name appears under the Name column on the Report Definitions tab of the Event Custom
Reports dialog box. This name must be unique for each report group. This is a required
parameter.
6. In the Title field, enter a title for the definition, which will be used as the title of a generated
report. This is a required parameter.
7. Click the Do not share this definition button if you do not want to share this definition with
other Management application users.
If you select this button, no Management application users will see this definition on the
Report Definitions tab of the Event Custom Reports dialog box when they log in.
8. Click the Share this definition (Read only) button if you want other Management application
users to have Read Only permission for this definition.
If you selected the Share this definition (Read only) button, a list of Management application
roles appears in the Available Roles list.
9. Select the roles that will have view and run access to this definition, then press the right arrow
button to move the role in the Selected Roles list.
NOTE
All Management application users who have the selected roles will be able to view, copy, and
run the definition.
10. Select the roles that will have view and run access to this definition, then press the right arrow
button to move the role in the Selected Roles list.
All Management application users who have the selected roles will be able to view, copy, and
run the definition.
NOTE
You can share the available users definition with specific Management application users. If you
click the Share this definition (Read only) button, a list of Management application user
accounts appears in the Available Users list.
11. Select the user account that will be able to view and run this definition, then press the right
arrow button to move that user account in the Selected Users list.
12. Click OK to save the definition, or click Run to launch the report.
Filtering a report definition
You can filter a report definition. To do so, you must first enter a name and title on the Identification
tab and select at least one column in the Results Setting tab to run or save a filter. You can select
from the available list of SAN products, IP products, or hosts by selecting the appropriate tab.
NOTE
The swDeviceStatusTrap (OID 1.3.6.1.4.1.1588.2.1.1.0.15) trap is sent from the switch whenever
there is a device login or logout. This trap is part of the SW-MIB and is listed under the SW-MIB of
the SNMP Trap Recipients dialog box, the Event Actions dialog box, and the SNMP Trap Forwarding
dialog box. For a complete list of event categories, refer to