Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1263)

Brocade Network Advisor SAN User Manual 1211
53-1003154-01
Predefined flow definition templates
29
Configuring Aggregated Flow template
The Aggregated Flow predefined template creates flow rows for all the ports in the storage array
with the source device and empty destination device details as shown in
Figure 522 .
FIGURE 522 Add Flow Definition - Aggregated Flow template dialog box
Perfom the following steps, in the Add Flow Definition - Aggregated Flow dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
<portname>_<last 4 digits of the source device WWN>.
2. Continue from step 2 through step 6 in “Configuring Static Flow template” on page 1209" to
deploy the flow definition.