Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1776)

1724 Brocade Network Advisor SAN User Manual
53-1003154-01
Database tables and fields
H
INVALID_TX Invalid transmissions double
precision
CRC_ERRORS Cyclic Redundancy check error double
precision
TABLE 457 VIRTUAL_PORT_WWN_DETAILS
Field Definition Format Size
ID Unique generated database identifier.
SWITCH_ID If the VPWWN is constructed based on AG Node WWN
and AG_Port_Index then this is id of connected
switch. int
SWITCH_PORT_NUMBER If the VPWWN is configured for AG , this value will
have the default value(-1). smallint
AG_NODE_WWN If the VPWWN is configured for Switch Port , this
value will have the default value. char 23
AG_PORT_NUMBER If the VPWWN is configured for Switch Port , this
value will have the default value. smallint
TYPE Active WWN
0-Auto is the switch created VPWWN and User is user
defined VPWWN';
1-User smallint
STATUS Enable or disable the VPWWN feature on switch port
or AG-port.
•
1-Enabled
•
0-disabled
smallint
USER_VPWWN User created VPWWN. char 23
AUTO_VPWWN VPWWN created by Switch. char 23
DEVICE_PORT_WWN Physical port WWN of the device for which VPWWN is
assigned. char 23
SLOT_NUMBER Slot number of the switch, This will be -1 for AG. smallint
TABLE 458 VIRTUAL_SWITCH
Field Definition Format Size
ID* Primary key for the table. int
NAME Stores the switch name. varchar 64
WWN WWN of the Switch. char 23
VIRTUAL_FABRIC_ID Virtaul fabric ID of the switch. A positive value will be
stored if VF is enabled else -1. smallint
DOMAIN_ID Domain ID of the switch. smallint
BASE_SWITCH Indidates whether its a base switch. 1 is base switch
and 0 is not. smallint
TABLE 456 VIRTUAL_FCOE_PORT_STAT (Continued)
Field Definition Format Size