Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 387
Brocade Network Advisor SAN User Manual
335
53-1003154-01
User-defined performance monitors
7
Accessing additional data from user-defined product performance monitors
•
In a Distribution monitor, double-click a percentage range to navigate to the Measure_Type
Distribution Data Details dialog box. For more information, refer to
“Viewing port distribution data details”
•
In a Top N or Bottom N product monitor, double-click a row or right-click a row and select Show
Graph/Table to navigate to the Historical Graphs/Tables dialog box for the selected measures.
For more information, refer to
Adding targets to a user-defined performance monitor
You can only add targets for Time Series monitors. For creating a user-defined dashboard, refer to
“Creating a user-defined dashboard”
on page 269 and perform the following steps to add targets
to a user-defined product performance monitor.
1. Click the Customize Dashboard icon.
The Customize Dashboard dialog box displays.
2. Click the Performance tab.
3. Click Add.
The Add Performance Dashboard Monitor dialog box displays.
4. Select Time Series from the Monitor Type - Product or Port area.
5. Select the port measure for the monitor in the Measure area
6. Display data for a specific duration from the Duration options.
7. Click Add beneath the Targets table.
The Performance Dashboard Monitor Targets dialog box displays.
Depending on the type of measure you select, you can add SAN products/portsand FCIP
tunnels to the list of targets.
If you selected a product measure, continue with
.
If you selected SAN port measure, continue with
.
If you selected a FC IP port measure, go to
.
8. Click the SAN tab.
9. Select SAN targets from the Available SAN Sources list.
10. Click the right arrow button to move the targets to the Selected Sources list.
11. Select FCIP targets from the Available list.
12. Click the right arrow button to move the targets to the Selected Sources list.
13. Click OK on the Performance Dashboard Monitor Targets dialog box.
The targets display in the Targets list of the Add Performance Dashboard Monitor dialog box.
14. Click OK on the Add Performance Dashboard Monitor dialog box.
The Customize Dashboard dialog box displays with the new monitor in the Performance
Monitors list.