Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1657)

Brocade Network Advisor SAN User Manual 1605
53-1003154-01
Database tables and fields
H
FCF_FCMAP FC Map value of port. Currently not used. varchar 256
FCF_FPMA_MAC FPMA (fabric-provided MAC address) MAC address of
port. Currently not used. varchar 64
FCF_MAC FCF (FCoE Forwarder) MAC value of port. varchar 64
FCF_MODE FCF (FCoE Forwarder) Mode of the port. Currently not
used. varchar 256
FCF_NAMEID FCF (FCoE Forwarder) Name of the port currently Not
used. varchar 256
FCPIM_MPIO_MODE Indicates whether multipathing I/O (MPIO) mode is
turned on or off. 1- on, 0 - off smallint
PORT_LOG_ENABLED True if port log is enabled. smallint
MAX_FRAME_SIZE The frame size, in bytes, of the FCoE port. int
MTU Maximum transmission unit in bytes of the FCoE port.
Default - 2112, 0 - auto int
PATH_TOV The value between 0 and 60 that specifies the
time-out session.
NOTE: You can only enable or edit the path time out
when MPIO is disabled
int
SCSI_QUEUE_DEPTH The LUN queue depth feature determines how many
concurrent IOs the adapter will accept and process
per LUN (not at the adapter port level, as with the IO
throttle value). Not setting the queue depth to the
optimal level can result in poor performance, where
outstanding IO queuing can cause bottlenecks. For
optimum performance, consider both the
configuration settings of the HBA and the physical
limits on the storage array. If you set the queue depth
too low on the HBA it could lead to under-utilization of
storage resources.
NOTE: The Queue Depth feature is supported for all
adapter classes configured in FC or FCoE
mode (Windows operating systems only)'
int
STATE The state of the FCoE port (online or offline). varchar 64
SUPPORTED_CLASS The classes supported on the FCoE port.
For example, Class2 and Class3. varchar 256
TRL_SPEED TRL (Target Rate limit) speed. This will be less than
max speed supported by this port. int
TRL_STATE TRL (Target Rate limit) state of the port. Possible
values are 0 - disable , 1 - Enable smallint
PG_ID The priority group ID. Possible values are 0-7
(user-definable) and 15.0-15.7 (strict priority). varchar 32
PRIORITIES 'Lists the available priorities (High, Medium, Low). varchar 128
FCOE_MAC FCOE MAC address of the port. varchar 64
IOC_ID The IO controller Identifier. int
TABLE 173 HBA_PORT_FCOE_DETAILS (Continued)
Field Definition Format Size