Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1538)

1486 Brocade Network Advisor SAN User Manual
53-1003154-01
Viewing SAN device properties
E
Port Speed (Gb/s) The port speed, in gigabits per second.
Port State The port state (online or offline).
Port Status The port’s operational status (online or offline).
Port Type The port type.
Port WWN The port’s world wide name.
Preshared key configured Whether the preshared key is configured for the FCIP tunnel.
Prohibited Whether the port is prohibited.
Protocol The network protocol, for example, Fibre Channel.
Reason The device status.
Remote Switch Name The remote switch name of the trunk.
Remote Switch IP The remote switch IP address of the trunk.
Remote Switch WWN The remote switch world wide name of the trunk.
Remote Slot # The remote slot number of the trunk.
Remote Master Port The remote master port of the trunk.
Remote Member Ports The remote member ports of the trunk.
Routing Policy The routing policy configured on the switch.
Sequence number The sequence number of the switch.
Serial # The hardware serial number.
Slot # The location (slot) of the port.
Source IP Address The IP address of the of the FCIP tunnel source device.
Speed (Gb/s) The port speed, in gigabits per second.
State The port state (online or offline).
Status The port’s operational status (online or offline).
Switch Name The switch name.
Switch IP The switch IP address.
Switch WWN The switch world wide name.
Symbolic Name The symbolic name of the port.
Tag The tag number of the port.
Tape Pipelining Whether tape pipelining is on or off for the FCIP tunnel.
Troubleshooting list Select to launch the dialog box of one of the following troubleshooting
options:
•
IP Ping
•
IP Traceroute
•
IP Performance
Tunnel Count The number of tunnels.
Tunnel ID The tunnel identifier.
Type The type of port, for example, U_port.
TABLE 140 Port properties (Continued)
Field Description