Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 156)

104 Brocade Network Advisor SAN User Manual
53-1003154-01
Miscellaneous security settings
4
Enforcing MD5 file during import
NOTE
The MD5 checksum file is required when you load Fabric OS firmware into the Management
application version 12.0 or later.
You can configure the Management application to enforce the MD5 checksum file import during
the import of the Fabric OS image into the firmware repository.
The MD5 checksum file can be obtained from the Fabric OS product download site in the same
location as the firmware file. The MD5 checksum file cannot be downloaded directly from the site;
however, you can open the file, copy and paste the contents into a new file, and save the file with
the .md5 extension in the same directory as the firmware file.
1. Select Server > Options.
The Options dialog box displays.
2. Select Security Misc in the Category list.
3. Select the Enforce Fabric OS MD5 Checksum File Import check box.
4. Click Apply or OK to save your work.
Configuring login security
To configure login security, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Security Misc in the Category list.
3. Choose one of the following options:
• To allow users to save their password in the Login Security list, select Allow clients to save
password on login.
• To not allow users to save their password in the Login Security list, select Do NOT allow
clients to save password on login.
4. Click Apply or OK to save your work.
Configuring the login banner display
To configure the login banner display, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Security Misc in the Category list.
3. Select the Display login banner upon client login check box.