Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 565)

Brocade Network Advisor SAN User Manual 513
53-1003154-01
Ports
12
• Add Flow button — Select a port and click to add a flow definition (refer to “Provisioning flows”
on page 1816).
NOTE
Flow Vision is supported on platforms running Fabric OS 7.2 and later.
• Port connectivity table — Displays the ports connected to the selected fabric or device. Loop
devices are displayed in multiple rows, one row for each related device port. If no switch or
device is connected to the port, then the related fields are empty.
- Port Number — The port’s number. To enable or disable a port, refer to “Enabling a port”
on page 515 or “Disabling a port” on page 515.
- Blade Number — The number of the blade.
- Port Name — The port’s name.
- Switch — The switch name.
- User Port Number — The port number of the user’s device.
- Area ID /Port Index — The area ID and the port index of the port.
- FC Address — The Fibre Channel address. Each FC port has both an address identifier and
a world wide name (WWN).
- Port WWN — The world wide name of the port.
- Calculated Status — The operational status. There are four possible operation status
values: Healthy, Down, Marginal, and Unmonitored.
- Status — The port’s status; for example, Enabled, Faulty, Healthy, Unknown, and so on.
- Switch Port Type — The port type; for example, E-Port, F-Port, U-port, and so on.
- Speed — The current port speed, in gigabits per second.
- Port Module — The port’s module.
- Prohibited — Whether the allow/prohibit matrix is activated.
- Blocked — Whether the selected port is blocked.
- Buffer Limited — Whether buffers are limited.
- Actual Distance — The actual distance for -end port connectivity.
- Buffers Needed/Allocated — The ratio of buffers needed relative to the number of buffers
allocated.
- Long Distance — Whether the connection is considered to be normal or longer distance.
- Switch Domain Id — The switch domain ID.
- Device Port/Switch WWN — The device port and switch world wide name.
- Device Port/Switch Name — The device port and switch name.
- Device Port/Switch State — The device port and switch state; for example, Online.
- Device Port/Switch Manufacturer — The device port and manufacturer of the switch.
- Serial # — The port’s serial number.
- Device Port / Switch Type Number — The device port and switch type number.
- Switch/Device Model — The model name and number of the device.
- Device Port/Switch Manufacturing Plant — The device port and switch manufacturing
plant.
- Device FC Address — The port FC address of the connected Host or target device.