Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 406)

354 Brocade Network Advisor SAN User Manual
53-1003154-01
SAN tab overview
8
9. Flow Vision — Displays the Flow Vision dialog box. Use to configure Flow Vision.
10. MAPS — Displays the MAPS dialog box. Use to configure MAPS.
11. Domain ID/Port # — Use to set the domain ID or port number to display as decimal or hex in
the Product List.
12. Product Label — Use to set the product label for the devices in the Connectivity Map and
Product List.
13. Port Label — Use to set the port label for the devices in the Connectivity Map and Product List.
14. Legend — Use to view the topology legend. For more information, refer to “SAN product icons”
on page 363.
15. Product List Search — Use to search for a device in the Product List. For detailed instructions,
refer to “Search” on page 374.
16. Help — Displays the Online Help.
View All list
The View All list is located at the top-left side of the window and enables you to create, copy, or edit
a view, select how to view the Product list (All Levels, Products and Ports, Products Only, or Ports
Only), and select which view you want to display in the main window. The View All list does not
display until you discover a fabric. To discover a fabric, refer to
“Discovering fabrics” on page 37.
1. Create View — Select to create a new view.
2. Copy View — Select to copy an existing view.
3. Edit View — Select to edit an existing view.
4. Levels — Select the level at which you want to view the Product list, Options include: All Levels,
Products and Ports, Products Only, or Ports Only.
5. View_Name — Any additional views that you create. Select which view you want to display in the
main window.
6. View All — Select to display the default view of the main window.
1
2
3
4
5
6