Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1917)

Brocade Network Advisor SAN User Manual 1865
53-1003154-01
Views
H
SELECT
l2.device_id,
l2.device_ip_address,
l2.physical_device_id,
l2.unit_number,
l2.slot_id,
l2.slot_num,
l2.module_id,
l2.physical_port_id,
l2.port_num,
l2.interface_id,
l2.name,
l2.if_name,
l2.identifier,
l2.speed_in_mb,
l2.physical_address,
l2.interface_id AS radioif_id,
wireless.radio_type,
wireless.is_enabled,
wireless.is_auto_channel,
wireless.tx_power,
wireless.channel_number,
wireless.max_data_rate,
wireless.beacon_rate,
wireless.dtim,
wireless.rts_threshold,
wireless.is_turbo_mode,
wireless.radio_g_mode,
wireless.max_associated_clients
FROM
((SELECT DISTINCT d.device_id, d.ip_address AS device_ip_address,
pd.physical_device_id, pd.unit_number, s.slot_id, s.slot_num, msp.module_id,
pp.physical_port_id, pp.port_num, i.interface_id, i.name, i.if_name,
i.identifier, pi.speed_in_mb, pi.physical_address
FROM device d, physical_device pd, slot s, module_slot_present msp,
physical_port pp, physical_interface pi, interface i
WHERE
(((((((d.device_id = pd.device_id)
AND (pd.physical_device_id = s.physical_device_id))
AND (s.slot_id = msp.slot_id))
AND (msp.module_id = pp.module_id))
AND (pp.physical_port_id = pi.physical_port_id))
AND (pi.interface_id = i.interface_id))
AND ((i.table_subtype)::text = 'RADIO_INTERFACE'::text)))
l2 LEFT JOIN
(SELECT radio_interface.interface_id
AS radioif_id, radio_interface.radio_type, radio_interface.is_enabled,
radio_interface.is_auto_channel, radio_interface.tx_power,
radio_interface.channel_number, radio_interface.max_data_rate,
radio_interface.beacon_rate, radio_interface.dtim, radio_interface.rts_threshold,
radio_interface.is_turbo_mode, radio_interface.radio_g_mode,
radio_interface.max_associated_clients
FROM radio_interface)
wireless ON ((l2.interface_id = wireless.radioif_id)));
WIRED_INTERFACE
CREATE VIEW wired_interface AS