Testing the call home center connection, Disabling a call home center – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 455
Brocade Network Advisor SAN User Manual
403
53-1003154-01
Testing the Call Home center connection
9
Testing the Call Home center connection
Once you add and enable a Call Home center, you should verify that Call Home is functional.
To verify Call Home center functionality, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Click Edit Centers (beneath the Call Home Centers list).
The Configure Call Home Center dialog box displays.
3. Select the Call Home center you want to check in the Call Home Centers list.
4. Make sure that the Enabled check box is selected.
NOTE
You must configure the Call Home center before you test the connection. To configure a Call
Home center, refer to
5. Click Send Test.
A faked event is generated and sent to the selected Call Home center. You must contact the
Call Home center to verify that the event was received and in the correct format.
6. Click OK to close the “Test Event Sent” message.
7. Click OK to close the Configure Call Home Center dialog box.
8. Click OK to close the Call Home dialog box.
Disabling a Call Home center
When a Call Home center is disabled, no devices can send Call Home events to the Call Home
center. However, the devices and event filters assigned to the disabled Call Home center are not
removed. You can still perform the following actions on a disabled Call Home center:
•
Edit Call Home center configuration.
•
Add devices and event filters to the Call Home center.
To disable a Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Clear the Enable check box of the Call Home center you want to disable in the Call Home
Centers list.
The selected Call Home center and its devices and event filters become unavailable. However,
the Call Home center is not disabled until you save your changes. When a device is assigned to
the Call Home center, a confirmation message displays.
3. Click OK to confirm.
4. Click OK to close the Call Home dialog box.