Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 710)

658 Brocade Network Advisor SAN User Manual
53-1003154-01
Layer 2 access control list management
17
Editing an extended Layer 2 ACL configuration (Fabric OS)
To edit an extended Layer 2 ACL configuration on a Fabric OS device, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
The Device_Name - Layer 2 ACL Configuration dialog box displays.
2. Select the ACL you want to edit in the ACLs list and click Edit.
The Configuration_Name Edit Extended Layer 2 ACL Configuration dialog box displays.
3. To edit an existing ACL rule, complete the following steps.
a. Select the rule you want to edit in the ACL Entries list and click the left arrow button.
b. Complete step 5 through step 12 in “Creating an extended Layer 2 ACL configuration
(Fabric OS)” on page 656.
The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries,
repeat
step 3 .
4. To add a new ACL rule, complete step 4 through step 12 in “Creating an extended Layer 2 ACL
configuration (Fabric OS)” on page 656.
The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat step 4 .
5. To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click
the left arrow button.
6. Click OK on the Edit - Layer 2 ACL Configuration dialog box.
The updated ACL displays in the ACL Entries list. To edit additional ACLs, repeat step 2 through
step 6 .
7. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
“Saving a security configuration deployment” on page 664
Copying an extended Layer 2 ACL configuration (Fabric OS)
To copy an extended Layer 2 ACL configuration, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
The Device_Name - Layer 2 ACL Configuration dialog box displays.
2. Select the ACL you want to copy in the ACLs list and click Duplicate.
The Duplicate - Layer 2 ACL Configuration dialog box displays with the default name ‘Copy of
Original_Name’.
3. Enter a new name for the ACL in the Name field.
4. To edit an existing ACL rule, complete the following steps.
a. Select the rule you want to edit in the ACL Entries list and click the left arrow button.
b. Complete step 5 through step 12 in “Creating an extended Layer 2 ACL configuration
(Fabric OS)” on page 656.
The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries,
repeat
step 4 .