Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1424)

1372 Brocade Network Advisor SAN User Manual
53-1003154-01
MAPS groups
33
• Available Ports/Circuits list — List of available ports, SFPs, or circuits and the associated
products for the selected group.

Group/Product — Available devices and ports

Name — Device name, port name, or circuit name

IP Address — IP address of the device

Product Type — Product type (such as switch or blade)
• Left and right arrow buttons — Click to move ports, SFPs, or circuits between the Selected
Ports/Circuits list and Selected Ports/Circuits list.
• Selected Ports/Circuits list — List of selected ports, SFPs, or circuits and the associated
products for the selected group.

Group/Product — Selected devices and ports

Name — Device name, port name, or circuit name

IP Address — IP address of the device

Product Type — Product type (such as switch or blade)
• Add button — Click to add a group to the Groups list. To create one or more groups on the
selected device or fabric, refer to
“Creating multiple groups” on page 1372.
• Delete button — Click to delete the selected group from the Groups list ( “Deleting a group”
on page 1373).
4. Click OK on the Fabric/Device _Name - Manage MAPS Groups dialog box.
5. Click Close on the MAPS Configuration dialog box.
Creating multiple groups
You can create groups that are in the same fabric or device.
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Configure.
The MAPS Configuration dialog box displays.
2. Select a fabric or device in the SAN/Fabric/Switch list and click Manage.
The Fabric/Device _Name - Manage MAPS Groups dialog box displays with a list of all
configured Port, SFP, or Circuit groups on the selected fabric or device in the Groups area.
3. Click Add.
The Add Group dialog box displays.
4. Enter a unique name (maximum 32 characters) for the group in the Name field.
5. Select the type of group you want to create from the Type list.
Options include: Port, SFP, and Circuit.
6. Add objects to the group by selecting the object (port, SFP, or circuit) in the Available
Ports/Circuits list and clicking the right arrow button.
The selected objects move from the Available Ports/Circuits list to the Selected Ports/Circuits
list.
7. Repeat step 3 through step 6 for each group you want to add.