Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 498)

446 Brocade Network Advisor SAN User Manual
53-1003154-01
Radius server configuration
11
For example:
client 172.26.3.76 {
secret = password
shortname = GVM1 server
}
3. Save and close the file.
Configuring user authorization for the Radius server
The user configuration file contains the individual user profiles.
1. Open the user configuration file (such as users.conf) a text editor (such as Notepad).
2. Enter the user data as follows:
user_name User-Password = "password"
NM-Roles-AORs-List = "nmRoles=management_roles; nmAORs=management_AORs"
where management_roles is one or more of the following roles (separated by commas):
Host Administrator, Network Administrator, Operator, Report User Group, SAN System
Administrator, Security Administrator, Security Officer, and Zone Administrator
and management_AORs is one or more of the following AORs (separated by commas):
All Fabrics or All Hosts
For example:
jsmith User-Password = "password"
NM-Roles-AORs-List = "nmRoles=Host Administrator,Network
Administrator,Operator,Report User Group,SAN System Administrator,Security
Administrator,Security Officer,Zone Administrator; nmAORs=All FabricsAll
Hosts"
3. Enter the following to make the default authentication type PAP:
DEFAULT Auth-Type = PAP
4. Save and close the file.
Configuring the dictionary file for the Radius server
The dictionary file defines the symbolic names for Radius attributes and values.
1. Copy the Management application dictionary file (dictionary.NM_AAA_dictionary) located in the
Install_Home/docs/Auth directory to the Radius server dictionary directory.
1. Open the dictionary configuration file (dictionary.NM_AAA_dictionary) a text editor (such as
Notepad).
The dictionary file contains the following information:
VENDOR vendor_name vendor_id_number
BEGIN-VENDOR vendor_name
ATTRIBUTE NM-Roles-AORs-List 1 string
END-VENDOR vendor_name