Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1082
1030
Brocade Network Advisor SAN User Manual
53-1003154-01
Saving or copying Allow/Prohibit Matrix configurations to another device
25
Saving an Allow/Prohibit Matrix configuration to another device
To save an existing Allow/Prohibit Matrix configuration to another device, complete the following
steps.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select the Allow/Prohibit Matrix configuration you want to save.
You can do this by expanding the view for the switch under Available Switches and selecting a
configuration, or you can select the matrix under Allow/Prohibit Matrix.
3. Click Save As.
The Save As/Duplicate dialog box displays, as shown in
FIGURE 469
Save As/Duplicate dialog box
4. Enter a name for the configuration.
5. Enter a description for the configuration.
6. Select the check box for the device to which you want to save the configuration in the Selected
Switch list.
7. Click OK.
A message displays stating that the outstanding port configuration is discarded when copying
a configuration from the switch with more ports to a switch with fewer ports and vice versa.
Click OK to close the message.
The saved configuration displays in the Available Switches table under the selected switch. To
edit this configuration, refer to
“Configuring an Allow/Prohibit Matrix”
on page 1025 or