Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 356)

304 Brocade Network Advisor SAN User Manual
53-1003154-01
Performance monitors
7
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor” on page 323.
Accessing additional data from the Top Port CRC Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
“Application menus” on
page 1411.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
“Performance Data” on page 1067.
Top Port Encode Error Out monitor
The Top Port Encode Error Out monitor ( Figure 130 ) displays the top ports with encoding errors
outside of frames in a table.
FIGURE 130 Top Port Encode Error Out monitor
The Top Port Encode Error Out monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.