Activating a maps policy, Replicating a policy to other devices – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1411
Brocade Network Advisor SAN User Manual
1359
53-1003154-01
MAPS actions
33
Activating a MAPS policy
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Configure.
The MAPS Configuration dialog box displays.
2. Select an inactive policy in the list and click Activate.
Only one policy can be active on a switch at a time. You can activate policies for multiple
switches at once by selecting the policy you want to activate for each switch and clicking
Activate.
When you edit the active policy on the switch, updated rules activate on the switch
automatically.
NOTE
The active policy indicates an active status icon in the Policies column of the Switch row and
Active Policy row.
3. Click Close on the MAPS Configuration dialog box.
Replicating a policy to other devices
You can replicate a non-default policy on a device to all MAPS-capable devices in a Fabric or SAN.
NOTE
Copying a policy from one device to another overwrites any policy with a matching name on the target
devices.
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Configure.
The MAPS Configuration dialog box displays.
2. Select a non-default policy on a device (source) you want to replicate in the list and click
Distribute.
The Distribution Options dialog box displays.
3. Set the destination by choosing one of the following options:
•
All fabric distribution — Select to replicate the policy on all MAPS-capable devices in the
SAN.
•
Within fabric distribution — Select to replicate the policy on all MAPS-capable devices in
the selected Fabric.
4. Set the activation parameters by choosing one of the following options:
•
Activate policy on each switch — Select to immediately activate the policy on the target
devices after distribution.
If the selected policy is not an active policy, Activate after distribution activates the policy
on the source device as well as the target devices.
•
Do not activate policy on each switch — Select to not activate the policy on the target
devices after distribution.