Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 922)

870 Brocade Network Advisor SAN User Manual
53-1003154-01
Viewing and editing encryption group properties
20
FIGURE 412 Encryption Group Properties dialog box - General tab
The dialog box contains the following information:
• Encryption Group Name: The name of the encryption group.
• Group Status: The status of the encryption group. Options are:
- OK-Converged: The Group Leader can communicate with all members.
- Degraded: The Group Leader cannot contact one or more of the configured group
members. When the group is in a degraded state, many operations are not permitted,
including configuring targets, hosts, LUNs, HA clusters, and tape pools.
• Deployment Mode: The group’s deployment mode, which is transparent mode.
• Failback Mode: Identifies the group’s failback mode. Options are: Automatic and Manual.
Failback mode can be changed by clicking on the field and selecting the desired mode.
The HA failback option determines the behavior when a failed encryption engine is
restarted. When one encryption engine in an HA cluster fails, the second encryption
engine in the HA cluster takes over the encryption and decryption of traffic to all
encryption targets in the first encryption engine.
When the first encryption engine comes back online, the encryption group’s failback
setting determines whether the first encryption engine automatically resumes encrypting
and decrypting traffic to its encryption targets. In manual mode, the second encryption
engine continues handling the traffic until you manually invoke failback using the CLI, or
until the second encryption engine fails.