Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1308)

1256 Brocade Network Advisor SAN User Manual
53-1003154-01
Event notification
32
Restrictions
The following items affect Fault Management operation.
Supported IP address types
The Management application receives traps and syslog messages for physical IP addresses only.
Event Purging
The default maximum number of days that historical events are stored is 365. You can select a
different default (from 1 to 365 ) in the Options dialog box under Event Storage.
Event Archiving
The default number of days that purged events are archived is 30. This value cannot be changed.
Event notification
The Management application records the SAN and IP events in the Master Log. You can configure
the application to send event notifications to e-mail addresses at certain time intervals. This is a
convenient way to keep track of events that occur on the SAN and IP networks. You can also
configure products to “call home” for certain events, notifying the service center of product
problems. For instructions about configuring call home for events, refer to
“Call Home” on
page 389.
Configuring e-mail notification
To send e-mail notification of events to users, complete the following steps.
1. Select Monitor > Event Notification > E-mail.
The E-mail Event Notification Setup dialog box (shown in Figure 535 ) displays.
FIGURE 535 E-mail Event Notification Setup dialog box