Viewing san device properties – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1527
Brocade Network Advisor SAN User Manual
1475
53-1003154-01
Viewing SAN device properties
E
Viewing SAN device properties
To view the properties for a device, complete the following steps.
1. Right-click any product icon and select Properties.
The Properties dialog box displays, with information related to the selected device (such as
switches, directors, HBAs, trunks, tunnels, and nodes).
To add user-defined property labels, refer to
Fields containing a green triangle ( ) in the lower-right corner are editable.
NOTE
Depending on the device type, some of the properties listed in the following table may not be
available for all products.
TABLE 137
Device properties
Field/Component
Description
Addressing Mode
The addressing mode of the switch.
Back to Edge Routing
Whether back to edge routing is supported.
Bandwidth
The bandwidth of the FCIP tunnel.
Capability
The node capability.
Compression
Whether compression is on or off for the FCIP tunnel.
Connected Virtual FCoE Port
The fabric name, switch name, and virtual FCoE port number of the
connected virtual FCoE port.
Contact
The primary contact at the customer site.
Contributors
The device contributors.
Device Type
Whether the device is an initiator or target.
Description
A description of the customer site.
Destination IP Address
The IP address of the of the FCIP tunnel destination device.
Discovery Status
The discovery status of the switch. Examples include “Discovered: Seed
Switch” and “Discovered: Not Reachable”.
Domain ID
The device’s domain ID, which is the top-level addressing hierarchy of
the domain.
Fabric
The fabric name.
Fabric Name
The name specified through the device Element Manager.
Fabric Watch
Whether Fabric Watch is up or down.
Factory Serial Number
The factory serial number.
Fastwrite
Whether fastwrite is on or off for the FCIP tunnel.
FC Port
The FC port of the FCIP tunnel.
FCoE Capable
Whether the device is Fibre Channel over Ethernet capable.
FCS Role
Whether FCS is supported.
Routing Policy
The routing policy configured on the switch.
Firmware
The firmware version.