Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 571
Brocade Network Advisor SAN User Manual
519
53-1003154-01
Ports
12
2. Review the following information:
•
Product properties for both devices.
•
Connection properties.
•
Selected connection port properties.
Depending on the device type at either end of the connection, some of the following fields
(
) may not be available for all products.
TABLE 52
Port connection properties
Field
Description
Product Properties table
The product information for the two connected switches.
Domain ID
The domain ID of the selected switch and product in xxs(yy) format,
where xx is the normalized value and yy is the actual value.
Fabric Name
The world wide name of the fabric.
IP Address
The IP address of the switch.
Name
The name of the switch.
WWN
The world wide name of the switch.
Connections table
One row for each circuit.
Status
Whether the connection is Active or Missing.
1-Port #
The port number of the first switch.
1-Port Type
The port type of the first switch.
1-WWPN
The world wide port number of the first switch.
1-MAC Address
The media access control (MAC) address of the first switch.
1-IP Address
The IP address of the first switch.
1-Speed (Gbps)
The speed of the first switch.
1-Trunk
Whether there is a trunk on the first switch.
1-Tunnel ID
The tunnel ID of the first switch.
1-Circuit ID
The circuit ID of the first switch.
2-Port #
The port number of the second switch.
2-Port Type
The port type of the second switch.
2-WWPN
The world wide port number of the second switch.
2-MAC Address
The MAC address of the second switch.
2-IP Address
The IP address of the second switch.
2-Trunk
Whether there is a trunk on the second switch.
2-Speed (Gbps)
The speed of the second switch.
2-Tunnel ID
The tunnel ID of the second switch.
2-Circuit ID
The circuit ID of the second switch.