Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 796)

744 Brocade Network Advisor SAN User Manual
53-1003154-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
20
Setting FIPS compliance
1. From the KeySecure Management Console, select the Security tab, then select Advanced
Security, > High Security.
The High Security Configuration page displays. (Refer to Figure 287 .)
FIGURE 287 KeySecure High Security Configuration page
2. Under FIPS Compliance, set FIPS Compliance to Yes.
This ensures that only TLS 1.0 connections are supported between the switch and the
KeySecure.