Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 503)

Brocade Network Advisor SAN User Manual 451
53-1003154-01
LDAP server configuration
11
4. Select NmAors in the Attributes list and click Edit.
The String Attribute Editor dialog box displays.
5. Enter the areas of responsibility (such as, All Fabricsand All Hosts) in the Value field and click
OK..
6. Select NmRoles in the Attributes list and click Edit.
7. Enter the Management application user roles (such as Host Administrator, Network
Administrator, Operator, Report User Group, SAN System Administrator, Security Administrator,
Security Officer, and Zone Administrator) in the Value field and click OK.
8. Close the ADSI Edit dialog box.
Assigning roles and AORs to an AD group
Using Authentication Server Groups, you assign users to groups within the Authentication Server
Groups server, and assign roles and AORs to the groups within the Management application.
To assign roles and AORs to an AD group, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click the Authentication Server Groups tab.
3. Select the roles and AORs you want to assign to the AD group in the Available Roles / AORs
table.
Select multiple roles and AORs by holding down the CTRL key and clicking more than one role
and AOR.
4. Select the AD group to which you want to assign the selected roles and AORs in the Active
Directory Groups table.
If the AD group you want does not display in the table, refer to “Loading an AD group” on
page 452.
5. Click the right arrow button.
The selected roles and AORs are moved to the Active Directory Groups table.
6. Click Apply to save your work
When you assign roles and AORs to an AD group and save the configurations, when you reopen
the Users dialog box and select the Authentication Server Groups tab, only the configured AD
group is available.
Removing roles and AORs from an AD group
To remove roles and AORs from an AD group, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click the Authentication Server Groups tab.