Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1427)

Brocade Network Advisor SAN User Manual 1375
53-1003154-01
MAPS violations
33
• 12 Hours — Displays data for the previous 12 hours beginning when the Violations dialog
box is displayed.
• 1 Day — Displays data for the previous day beginning when the Violations dialog box is
displayed.
• 3 Days — Displays data for the previous 3 days beginning when the Violations dialog box is
displayed.
• 1 Week — Displays data for the previous week beginning when the Violations dialog box is
displayed.
• 1 Month — Displays data for the previous month beginning when the Violations dialog box
is displayed.
3. Review the detailed data.
You can sort the contents by clicking the column header. Click the same column header again
to reverse the sort order.
• Time (MAPS and Fabric Watch support) — The time on the server when the violation was
reported.
• Fabric Name (MAPS and Fabric Watch support) — The Fabric name to which the object
belongs.
• Product (MAPS and Fabric Watch support) — The device name.
• Object Name (MAPS and Fabric Watch support) — The object name (such as switch name,
port name, FRU name, and so on).
• Category (MAPS and Fabric Watch support) — The category of the measure violated
corresponding to the Dashboard tab and configuration dialog boxes.
• Rule Name (MAPS only support) — The rule name.
• Rule Condition (MAPS and Fabric Watch support) — Associates the condition with the
action triggered when the condition occurs.
• Action cells (MAPS only support) — Actions taken as a result of rule violation. Each action
has a column and actions triggered for a rule have a check mark. Possible values for the
Action cells include:

Green check mark — The action is configured and enabled on the device. Tool tip
displays as “Configured and triggered”.

Disabled — The action is configured, but disabled, on the device. Tool tip displays as
“Configured in rule, but disabled at switch”.

Empty — The action is not configured on the device. Tool tip displays as “Not
configured”.

Greyed-out — Data cannot be determined because event collection occurred during
discovery (not MAPS violation). Tooltip displays as “Unknown”.
Supported actions include:

Marginal (switch status)

Critical (switch status)

RAS Log

SNMP

Port Decommission

Fence (Port Fencing)