Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 58)

6 Brocade Network Advisor SAN User Manual
53-1003154-01
Management server and client
1
FIGURE 3 Management application web client log in page
2. Enter your user name and password.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
3. Press Enter or click the log in arrow icon.
4. Click OK on the Login Banner.
The Management application web client displays.
NOTE
If the Administrator disconnects the web client using the Active Sessions dialog box (Server >
Active Sessions), the web client redirects to the login page after three minutes or as soon as
you make a selection.
Launching the Configuration Wizard
You can re-launch the Configuration wizard to change the following configurations:
• FTP server
• Server IP
• Server Ports
• SMI Agent
NOTE
Changes to these configurations require a server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).