Removing an event filter from a device, Searching for an assigned event filter, Removing an event filter from – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 461: The call home event filters list, Removing an event filter from a, Device
Brocade Network Advisor SAN User Manual
409
53-1003154-01
Removing an event filter from a device
9
Removing an event filter from a device
To remove an event filter from a device, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Choose one of the following options in the Call Home Centers list:
•
Right-click a device to which the event filter is assigned and select Remove Filter.
•
Select an event filter assigned to a device and click the left arrow button. Press CTRL and
click to select multiple event filters assigned to multiple devices.
All event filters assigned to the device are removed.
3. Click OK to close the Call Home dialog box.
Removing an event filter from the Call Home Event Filters list
To remove an event filter from the Call Home Event Filters list, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the event filter you want to remove in the Call Home Event Filters list.
3. Click Remove.
•
If the event filter is not assigned to any devices, a confirmation message displays asking if
you want to remove the event filter. Click Yes.
•
If the event filter is assigned to any devices, a confirmation message displays informing
you that removing this event filter will remove it from all associated devices. Click Yes.
The event filter is removed from any associated devices and the Call Home Event Filters list.
To determine to which devices the event filter is assigned, select the event filter and then click
the Find button (>).
4. Click OK to close the Call Home dialog box.
Searching for an assigned event filter
To find all devices to which an event filter is assigned, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the event filter you want to find in the Call Home Event Filters list.
3. Click the Find button (>).
All instances of the event filter are highlighted in the Call Home Centers list.
If the selected event filter is not assigned to any devices in the Call Home Centers list, a not
found message displays.