Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 189
Brocade Network Advisor SAN User Manual
137
53-1003154-01
Fabric tracking
4
Accepting changes for a switch, access gateway, or phantom domain
1. Accept the changes to a switch, access gateway, or phantom domain by choosing one of the
following options:
•
Select the switch, access gateway, or phantom domain on the Product List or Connectivity
Map and select Monitor > Accept Changes.
•
Right-click the switch, access gateway, or phantom domain on the Product List or
Connectivity Map and select Accept Change.
The accept changes summary message displays. This message includes the following
information:
•
Do not show me this again check box — Select if you do not want to see this dialog box
again when you enable or disable fabric tracking or accept changes for a switch or fabric.
•
Switches — This table shows a brief summary of the switches including status (whether the
device port will be added (
) or removed (
) from the fabric), name, fabric name,
IP address, WWN, and domain ID. This table includes unmonitored switches which
becomes segmented from the fabric.
•
Device Ports — This table shows a brief summary of the device ports including status
(whether the device port will be added (
) or removed (
) from the fabric), reason
(why the device is missing), product type, port, fabric name, port WWN, node WWN, and
attached port number.
•
Connections — This table shows a brief summary of the switch connections including the
status (whether the device port will be added (
) or removed (
) from the fabric),
reason (why the connection is missing), and connection type as well as the fabric name,
WWN, domain ID, IP address, and port number of the connected switches.
2. Click Yes to accept changes.