Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1499)

Brocade Network Advisor SAN User Manual 1447
53-1003154-01
Product events
C
Product events
All other events originating from the product are categorized as product events.
IP Performance monitoring events
IP performance monitoring events, listed in Table 130 , occur when users select the option to
forward events to the vCenter during VM Manager discovery.
RASLog Events
The supported events for Event Triggered backup are listed in Table 131 .
TABLE 130 Performance monitoring IP threshold events
Trap name OID Description
bnaRisingThresholdCrossed 1.3.6.1.4.1.1991.1.13.2.0.1 The value of monitored SNMP
variable or expression has exceeded
the value specified as the higher
threshold.
bnaFallingThresholdCrossed 1.3.6.1.4.1.1991.1.13.2.0.1 The value of the monitored SNMP
variable or expression has failed
below the value specified as the
lower threshold.
TABLE 131 Configuration change events
Event ID Type Description
AG-1006 LOG Access Gateway mode has been enabled or disabled.
AG-1013 LOG N_port failover.
AG-1014 LOG N_port failback.
AG-1016 LOG Failing over F_Ports mapped to N_Port <port number> to other N_Ports.
AG-1020 LOG F_Ports to N_Ports route mapping has been changed.
AG-1022 LOG F_Port <f_port> is failed over to its preferred N_Port <n_port>.
AG-1023 LOG F_Port <f_port> mapped to offline N_Port <n_port> is failed over to its
preferred N_Port <preferred port>.
AG-1033 AUDIT | LOG F_Port to N_Port mapping has been updated for N_Port (<n_port>).
AG-1041 LOG Static F_Ports mapped to N_Port <port number> are disabled as Trunking
is enabled on the N_Port.
AN-1006 AUDIT Bottleneck detection configuration is successfully changed.
AN-1006 AUDIT Bottleneck detection configuration is successfully changed.
BL-1001 LOG Port initialization completed.
BLS-1002 AUDIT | LOG An IPsec/IKE policy was added.
BLS-1003 AUDIT | LOG An IPsec/IKE policy was deleted.
CONF-1000 LOG | AUDIT configDownload completed successfully.