Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1351)

Brocade Network Advisor SAN User Manual 1299
53-1003154-01
Pseudo events
32
The Pseudo Events dialog box, shown in Figure 561 , displays.
The name of the event action is the name of the selected action with the word “copy”
appended. For example, “Event1” becomes “Event1 copy”.
4. Enter a new name for the pseudo event definition.
5. Make the changes you want to make to the definition. Refer to “Creating pseudo event
definitions” on page 1295 for details.
6. Click Finish to save your definition.
Editing a pseudo event definition
Use caution when you modify pseudo event definitions. Saving changes to a pseudo event
definition resets the run-time information for that pseudo event.
To edit a pseudo event definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 561 , displays.
2. Select the pseudo event definition that you want to edit from the Pseudo Events list.
3. Click the Edit button to display the Edit Pseudo Event dialog box.
4. Make the changes you want to make to the definition. Refer to “Creating pseudo event
definitions” on page 1295 for details.
5. Click Finish to save your definition.
Deleting a pseudo event definition
Use caution when you delete pseudo event definitions. Deleting a pseudo event definition discards
the run-time information for that pseudo event.
To delete a pseudo event definition, complete the following steps.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 561 , displays.
2. Select the pseudo event definition that you want to delete from the Pseudo Events list.
3. Click Delete.
A message displays, prompting you to confirm the deletion request.
4. Click Yes to delete the selected definition.
The definition is removed from the Pseudo Events list.
Creating an event action from a pseudo event
You can create an event action from a pseudo event. An event action can be created only for the
selected pseudo event.
To create an event action from a pseudo event, complete the following steps.