Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1245)

Brocade Network Advisor SAN User Manual 1193
53-1003154-01
Flow Mirror
29
13. Select one of the following format options for Switch mode:
• Port (slot/port) — Select to display the switch ingress or egress port using the slot and port
number.
• D,I (domain ID, port number) — Select to display the switch ingress or egress port using the
domain ID and port number.
14. Enter the ingress port in Port (slot/port) or D,I (domain ID,port number) format in the Ingress
field or click the ellipsis button to select a port from the list.
Enter an asterisk (*) to use any port. To select the ingress port from a list, refer to “Selecting an
ingress or egress port from a list of available switch ports” on page 1146".
NOTE
You must enter the slot number and the port number. For Backbone chassis, the slot number
cannot be 0 (zero). For switches, you must enter 0 (zero) as the slot number. For logical (virtual)
switches, follow the rule for the physical chassis (either Backbone chassis or switch) from
which you created the logical switch.
When you enter a value in the Ingress or Egress fields, a port information field displays
beneath with the port label based on your topology layout settings (refer to
“Changing the port
label” on page 386"). If you enter an asterisk (*) or no value in the Ingress or Egress fields, this
field remains blank.
15. Enter the egress port data in Port (slot/port) or D,I (domain ID,port number) format in the
Egress field or click the ellipsis button to select a port from the list.
Enter an asterisk (*) to use any port. To select the egress port from a list, refer to “Selecting an
ingress or egress port from a list of available switch ports” on page 1146".
NOTE
You must enter the slot number and the port number. For Backbone chassis, the slot number
cannot be 0 (zero). For switches, you must enter 0 (zero) as the slot number. For logical (virtual)
switches, follow the rule for the physical chassis (either Backbone chassis or switch) from
which you created the logical switch.
16. For FCR or virtual fabrics, select one of the following format options for FCR/XISL mode:
• Fabric ID — Select to configure a flow definition for an FCR fabric.
• VFID (Virtual Fabric ID) — Select to configure a flow definition for virtual devices.