Switch report – Brocade Network Advisor SAN User Manual v12.3.0 User Manual

Page 307

Advertising
background image

Brocade Network Advisor SAN User Manual

255

53-1003154-01

Reports

6

Switch Report

The Switch Report provides a information about the selected switch and ports.

Table 22

describes the fields and components of the Switch Report. For general report content and

table functions, refer to

“Report content and functions”

on page 261.

Port Status

The status of the port to which the AG is connected.

Port State

The state of the port to which the AG is connected.

Port Type

The type of port the AG is connected to. Should typically be E-Port

Physical/Logical Port

Whether the port connected to the AG is Physical or Logical.

TABLE 21

Fabric Ports report fields and components (Continued)

Field/Component

Description

TABLE 22

Switch Report fields and components

Field/Component

Description

Switch Details table

Name

The name of the switch.

WWN

The world wide name of the switch.

IP Address

The IP address (IPv4 or IPv6 format) of the physical switch.

Model

The model of the switch.

State

The state for the switch. For example, online or offline.

Operational Status

The operational status of the switch. For example, healthy, operational, degraded, marginal,
down, failed, unknown, or unreachable.

Previous Operational Status

The previous operational status of the switch.

Vendor

The vendor name.

Type

Whether the device is virtual, physical, or NPIV.

Firmware Version

The firmware version of the switch.

AG Mode

Whether or not the switch is running in AG mode.

Domain ID

The Domain ID for the switch in the format xx(yy), where xx is the normalized value and yy is
the actual value on the wire.

Port Count

The number of ports on the switch.

Occupied Port Count

The number of occupied ports on the switch.

Free Port Count

The number of free ports on the switch.

Unlicensed Port Count

The number of unlicensed ports on the switch.

Initiator Count

The number of initiator ports on the switch.

Target Count

The number of target ports on the switch.

Initiator/Target Count

The number of initiator and target ports on the switch.

Unreachable Time

The date and time the switch became unreachable.

Last Update Time

The date and time when the information for the switch was last updated.

Switch Ports table

Advertising