Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 159)

Brocade Network Advisor SAN User Manual 107
53-1003154-01
SNMP Trap forwarding credential settings
4
3. Enter the SNMP listening port number of the Server in the SNMP Listening Port (Server) field, if
necessary.
The default SNMP listening port number is 162 and is automatically populated.
4. Click Apply or OK to save your work.
SNMP Trap forwarding credential settings
You can configure SNMP credentials for the traps forwarded by the server.
Configuring SNMP v1 and v2c credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays ( Figure 36 ).
FIGURE 36 Options dialog box (Trap Forwarding Credentials pane)
3. Enter the unique community string (case sensitive, 1 to 16 characters). in the Community and
Confirm Community fields.
Displays as asterisks. Allows all printable ASCII characters.
4. Click Apply or OK to save your work.