Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 456)

404 Brocade Network Advisor SAN User Manual
53-1003154-01
Viewing Call Home status
9
Viewing Call Home status
You can view Call Home status from the main Management application window or from the Call
Home Notification dialog box.
The Management application enables you to view the Call Home status at a glance by providing a
Call Home status icon on the status bar.
Table 38 illustrates and describes the icons that indicate
the current status of the Call Home function.
To view more detail regarding Call Home status, click the Call Home icon. The Call Home
Notification dialog box displays the following information for the list of devices that have assigned
filters or Call Home disabled:
• Product — The name of the device. Click to go to the device in the topology.
• IP Address — The IP address (IPv4 or IPv6 format) of the device.
• Status — The status of the device. The possible status options include:
- Enabled — The device is manageable, Call Home is enabled, and a filter is applied.
- Disabled — Call Home is disabled on at least one device or Call Home is disabled from the
Call Home dialog box.
- Not Manageable — Manageability is lost.
- Server Not Registered — The server is not registered to receive Call Home events from this
device.
NOTE
Call Home status only displays for Fabric OS products.
• Filter — The name of the active event filter assigned to the device.
• Call Home button — Click to launch the Call Home dialog box, where you can configure Call
Home centers.
TABLE 38 Call Home icons
Icon Description
Normal — Displays when Call Home is enabled on all devices and no filters are applied.
Degraded — Displays when Call Home is enabled on all devices and at least one filter is
active.
Disabled — Displays when any of the following conditions are met:
•
At least one device's Call Home is disabled.
•
At least one non-manageable device.
•
At least one device does not have the Management server registered as a trap recipient.