Top port c3 discards rx to monitor – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 240
188
Brocade Network Advisor SAN User Manual
53-1003154-01
Dashboard customization
6
Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor displays the top ports with receive Class 3 frames received
at this port and discarded at the transmission port due to timeout in a table.
The Top Port C3 Discards RX TO monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 225). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
C3 Discards RX TO/sec — The number (error rate) of Class 3 frames received at this port and
discarded at the transmission port due to timeout errors per second for the duration specified
in the monitor.
•
C3 Discards RX TO — The number (error count) of Class 3 frames received at this port and
discarded at the transmission port due to timeout errors for the duration specified in the
monitor.
Viewing additional details for the Top Port C3 Discards RX TO monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 225). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
C3 Discards RX TO/sec — The number (error rate) of Class 3 frames received at this port
and discarded at the transmission port due to timeout errors per second for the duration
specified in the monitor.
•
C3 Discards RX TO — The number (error count) of Class 3 frames received at this port and
discarded at the transmission port due to timeout errors for the duration specified in the
monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.