Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 48)

xlviii Brocade Network Advisor SAN User Manual
53-1003154-01
What’s new in this document
The following changes have been made since this document was last released:
• Information that was added:
- Troubleshooting
 Discovery troubleshooting
 Element Manager troubleshooting
- IP Element Manager
 Configure dialog box
- Dashboard Management
 Top Port Traffic monitor
• Information that was changed:
- CLI Configuration Management
 Product configuration templates
- Dashboard (SAN and IP)
 Monitoring and Alerting Policy Suite/Fabric Watch widgets
 Out of Range violations widget
 Port Health violations widget
- VCS Management
 Tracing Ethernet fabric routes
- Device Properties
 Viewing VCS fabric properties
 Viewing IP device and port properties
- Database tables
- IP Element Manager
 Element Manager interface overview
 Displaying port properties
 Element Manager toolbar
 Performance data
FX8-24 Blade 1, 2 8 Gbps Extension Blade
1 Professional can discover but not manage this device. Use the device’s Element Manager, which can be launched from the Connectivity
Map, to manage the device. This device cannot be used as a Seed switch.
2 Professional Plus Trial and Licensed version can discover but not manage this device. Use the device’s Element Manager, which can be
launched from the Connectivity Map, to manage the device. This device cannot be used as a Seed switch.
3 Only supported on the DCX 8510-4 and DCX 8510-8 chassis.
TABLE 1 Fabric OS-supported hardware (Continued)
Device name Terminology used in documentation Firmware level required